J99b 1 m
J99B Microphone Preamp
The SCA J99B is a flexible, high-gain, low-noise, low-distortion microphone preamplifier, based on the classic Jensen Twin Servo design. This is a great preamp to use when a neutral sonic character is required, but the slightest amount of euphonic transformer coloration is desired.
Not available as a kit!
CH02-SP-J99 subpanel must be ordered separately.
$479
Can ship in 1 to 2 weeks

Features
High Gain
The J99B can provide 70dB of gain which includes the voltage step-up provided by the input transformer. Jumpered for 300 ohms input impedance, the maximum gain available is not quite 76dB.
Low Noise
With an EIN approaching -130dB, the J99 is quiet enough to use in virtually any recording application, especially with low-output ribbon mics.
Dual DC Servos
The J99B has a DC servo for each op-amp and uses no capacitors in the signal path.
Stepped Gain Control
A 12 position Grayhill switch provides accurate and repeatable gain settings in 5dB steps from 15dB to 70dB.
Gain Trim
Since 5dB is often too big a gain step, the A12 also has a gain trim control, which provides up to 6dB of cut at any gain setting. This allows very fine adjustment of gain between steps.
Phase Reverse
Inverts the signal phase.
Phantom Switch
Slow-rise phantom power minimizes pops and thumps.
Neutrik Connectors
High quality PC mount connectors eliminate cabling and ease assembly.
Lundahl Input Transformers
The J99 uses a Lundahl 1538XL to couple the microphone signal to the amplifier. This transformer is used in a number of high-end preamps and it provides superior performance in a compact package.
Cinemag Output Transformer
The CineMag CMOB-2H output transformer provides a balanced, floating output with extremely low distortion and wide bandwidth.
Flexible Power Supply
On-board voltage regulators can accommodate power supplies from +/-27VDC up to +/-35VDC, allowing the use of op-amps with +/-24VDC requirements. Potentiometers allow easy voltage adjustment, making experimenting fast and simple. Local regulation also keeps inter-channel crosstalk extremely low when multiple preamps share the same power supply.
Built-In Op Amps
The J99B has two high-performance discrete op-amps laid out directly on the main circuit board. These MAT14-based amplifiers have better noise performance than our SC99 amplifier modules.
J99b sp m