Planning a CH02 Rack: How to Build Toward Eight Channels
Most studios don't buy eight preamps at once. A more common path is two to four modules at a time, growing toward 8, 16, or 24 channels as sessions demand it. The CH02 is built for exactly that, but a little planning up front saves you from rearranging the rack later.
What the CH02 Is
The CH02 is a 2RU steel chassis that holds up to eight modules in any combination, with its own internal power supply (universal 85–250 VAC input). It ships bare: the modules, their faceplates, blank subpanels, and divider panels are all separate purchases.
What You Need Besides the Modules
A faceplate (subpanel) for each module.
Blank subpanels to close up any empty slots.
Divider panels. SCA recommends at least one divider panel between transformer-based modules (N72, A12B, J99) to prevent crosstalk.

If you'd rather start with something that works out of the box, the CH02 Starter Packs include the chassis with its power supply, one assembled preamp of your choice, and that preamp's faceplate. Blanks and dividers for future modules are still separate.
Decide on Voices Before Channel Count
Before counting channels, think about what you record and how many inputs your busiest session needs at once. A few questions help:
Do you want every channel to sound the same, or a few different characters to choose from? A matched set of one module keeps a drum kit consistent; a mix gives you options per source.
How many sources do you track at once? Full drum kits drive channel count more than anything else.
Do you need more than preamps? The B16 VCA compressor, H32 high-pass/low-pass filter, and D11 two-channel DI fit the same chassis.
Plan the Layout
Sketch all eight slots now, even the ones you won't fill this year. Decide where transformer modules will sit and where the dividers go between them, and leave the empty slots in a sensible place for what you'll add next. Filling a planned rack is easier than rearranging a full one.
Buying in Stages
Start with the channels you need now. Each module is independent, so adding more later doesn't change the ones already installed, and kit-built and assembled modules can share the same chassis. If one well-built rack isn't enough, a second CH02 extends the same system.
If You Only Need One Channel
The PC01 is a single-module case with its own power supply. It's the simpler choice for one channel. If there's a real chance you'll want more, compare it against a CH02 before you buy, since the chassis is the part you only want to buy once.




Comments